Link Search Menu Expand Document
UXA90-Light Documentation

Turn on Sequence

After the robot has been unpacked and placed in the sitting position it can be turned on. One person should be holding the tether at all times in case the robot falls over.

  1. Make sure the red power switch located on the lower back is turned off
  2. Plug the power supply into the yellow port on the robot’s lower back
  3. Plug the power supply into the wall
  4. Toggle the red power button on the lower back on. Lights will flash to confirm power
  5. Toggle the black switch on the back underside of the chest on
  6. Press and release the power button on the shoulders

To additionally boot the internal computer in the robot, press and hold the power button in step 6.